Page:
35
Code:
000088BG
Chapter:
7
This document is the property of the Manufacturer and/or its
Agent and must not to be tampered with or changed, reproduced or provided to others without written consent.
1. adjust the vernier dial
21
to zero.
2. Push the button
E05
. Make the piston move forward so as to arrive
with the closed dies.
3. use the standard quick change tool with eight pins inserting them
into the holes which are positioned in the front of the dies
06
. auto-
matically the dies will hook on the relative pins through the magnets.
4.
Taking the standard quick change tool firmly pressed, press the
button
E04
making the piston move back till the end of the stroke;
automatically the dies will remain constrained to the special quick
change tool
5.
Insert the dies in the shell, considering that the pins should slide
in the guide obtained on the same shells
12
, then rotate lightly
clockwise.
6.
Draw the standard quick change tool out lightly levering downward,
automatically the dies will remain on the shell.
Die removal with standard quick change tool
DIE REPLACEMENT WITH STANDARD QUICK CHANGE TOOL
N.B. Start the machine before beginning the quick
change die process.
“N”
“N”
“N”
“N”
“N”
“N”
“N”
“N”
“N”
“N”
