Page:
27
Chapter:
This document is the property of the Manufacturer and/or its
Agent and must not to be tampered with or changed, reproduced or provided to others without written consent.
6
Code:
000138CG
Equipping
The machine can be equipped with (OPTIONAL) devices that facilitate
preparation or machining, such as, for example:
- Change tool
“N”
for replacing the dies in economic mode. (OPTIONAL)
- the shell carrying dispenser
“R”
(OPTIONAL)
- the patented quick change tool
11
for changing the dies in rapid mode
and the
“M”
magazine that collects the shells
12
(OPTIONAL)
- Kit for cleaning and greasing tubomatic
“Q”
(Vedi allegato: Istruzioni
per il cambio filtro, lavaggio ed ingrassaggio) (OPTIONAL)
- the Mobile support
“P”
(OPTIONAL).
- the
electrical pedal (OPTIONAL)
40
- Magazine and quick change tools
the machine has a system for quick changing of the dies
06
that is made
up of a patented quick change tool
11
(OPTIONAL) and a magazine
(OPTIONAL) that supports the
shells
12
that are used to change all the
dies in a single operation, as described in the OPERATING Chapter,
under the “DiE rEPlaCEMEnt WitH PatEntED QuiCK CHanGE
tOOl” heading.
a set of dies
06
is also supplied with the machine, as indicated in the
Table: Hose crimping dies
and defined when ordering to suit the
Client’s needs.
upon request it is possible to supply dies with special nominal diameters.
No equipment or devices made by other manufacturers
may be used. If this is done the pre-requisites for ho-
nouring the guarantee lapse and the Client takes full
responsibility for any damage.
Table: Hose crimping dies mm / inch
tuBH119D10
tuBH119D12
tuBH119D14
tuBH119D16
tuBH119D19
tuBH119D22
tuBH119D25
tuBH119D29
tuBH119D34
tuBH119D38
tuBH119D42
tuBH119D46
tuBH119D50
tuBH119D54
tuBH119D58
tuBH119D63
tuBH119D69
tuBH119D73
0,472
0,551
0,630
0,748
0,866
0,984
1,142
1,339
1,496
1,654
1,811
1,969
2,126
2,283
2,480
2,717
2,874
4,134
0,394
0,472
0,551
0,630
0,748
0,866
0,984
1,142
1,339
1,496
1,654
1,811
1,969
2,126
2,283
2,480
2,717
2,874
Order code
Recommended hosefitting diameter
Ø min
mm
Ø max
mm
Ø min
inch
Ø max
inch
10
12
14
16
19
22
25
29
34
38
42
46
50
54
58
63
69
73
12
14
16
19
22
25
29
34
38
42
46
50
54
58
63
69
73
105
“M”
“Q”
“P”
“M”
”
”
R
“N”
(OPTIONAL)
40
