Page:
18
Code:
000012CG
Chapter:
This document is the property of the Manufacturer and/or its
Agent and must not to be tampered with or changed, reproduced or provided to others without written consent.
3
RISK ZONES AND OPERATIONS
Installation conditions
this machine must not be installed out in the open or under adverse
ambient conditions (sun, rain, wind, etc.). The
safety distances must
also be respected to avoid dangerous situations.
Also make sure that there is no electromagnetic in-
terference.
Standard machines are not equipped to work in envi-
ronments that are particularly inflammable or explosi
-
ve. Flameproofing is only supplied by request.
the machine has been designed according to the standards for con-
serving energy and those in force on energy saving.
n.B. these conditions also apply to any subsequent installations.
Maintenance works and safety devices
Guards, doors, or gates can only be removed using tools. In some cases
they can be opened, but are protected by specific systems.
Removal of guards or protective devices with the door
open is only permitted for qualified personnel and only
for extraordinary maintenance works.
Once this work has been completed the technician
must reinstate the original conditions.
The guards may be removed only after the power is
switched off.
switches and / or emergency buttons that are placed directly on the
machine or nearby are provided with locking devices to prevent acci-
dental power on. In any case, make sure that nobody else can reset or
start the machine. Maintenance technicians are to report any fault or
deterioration due to wear or ageing.
the machine must be cleaned using suitable equipment and detergents
that do not attack the machine’s components in any way. Cleaning the
machine with water jets is completely forbidden.
Thermal danger
The machine may have hot surfaces due to overheating
(e.g. motors, coils, piping, etc.), so be careful where
you touch it.
In case of fire use CO2 foam extinguishers and self-suctioning systems
to fight the fire in closed environments.
Personnel clothing
Personnel are nOt to go near the machine or equipment with bare
feet or wet hands.
Personnel are not to wear clothing with long sleeves, laces, or belts
that may hamper their personal safety.
Personnel are to wear the clothing and personal protective equipment
made available by the employer: gloves, shoes, overalls, etc.