Page:
32
Code:
000089DG
Chapter:
7
This document is the property of the Manufacturer and/or its
Agent and must not to be tampered with or changed, reproduced or provided to others without written consent.
vernier dial
21
:
- Use the knurled adjusting ring nut to obtain the required diameter,
turning it clockwise to reduce the swaging diameter or counterclockwise
to increase it.
Use the knurled flywheel to adjust the pressing diameter (pos.
D
) and
the electronic position indicator display (pos.
E
).
Example: in order to obtain a final diameter of 12 mm, use a die with
size 10. Bearing in mind that the two diameters have a 2 mm difference,
this value should be shown on the display.
- the vernier dial group
21
is provided with an electronic position indica-
tor (
E
) for detecting the absolute or incremental position of the vernier.
Characteristics:
• Convert the linear unit of measure: (mm, inches).
The direct drive electronic position indicators (pos. E)
is provided with its own use and maintenance manual
(see CHAP. 10: “Annexes”).
Full knowledge of the instruMEntatiOn is one of the prime rules
to avoid damage the machine and the operator.
We therefore recommend reading this manual carefully
and if there is any uncertainty or discrepancy in the
information, ask the manufacturer for more specific
information.
For any dispute regarding the indicated technical information, please
make reference to the “OriGinal instruCtiOns” of the instructions
manual provided alongside the machine and reproduced in sECtiOn
10: annexes
WARNING:
NEVER switch the direct drive electronic position
indicator off.
In case of battery replacement, it is necessary to per-
form a “zero setting” of the machine; please contact
O+P srl for this purpose.
the low battery symbol is shown on the display when the battery re-
placement is required.
WARNING:
When this symbol is shown on the display:
ADJUST THE VERNIER DIAL TO ZERO and proceed
to the replacement of the battery (remove the screw
of the front cover using a TORX-TX6 tool)
VERNIER DIAL CONTROLS
21
E
21
D
Flashing low
battery symbol
