Page:
30
Code:
000089DG
Chapter:
7
This document is the property of the Manufacturer and/or its
Agent and must not to be tampered with or changed, reproduced or provided to others without written consent.
•
E01 - “START” BUTTON:
this button should be pressed to start
working after an emergency stop or after a power outage.
•
E02 - “STOP” BUTTON:
When this button is pressed the fitting
machine stops immediately.
•
E03 - EMERGENCY STOP.
When this button is pressed the fitting
machine stops immediately. To restore operation, unlock the button
by turning it in the direction of the arrows and press the “start”
button.
•
E04 - “OPEN” BUTTON:
When this button is pressed the piston
moves back and the dies open. When the button is released the
piston stops.
•
E05 - “CLOSE” BUTTON:
When this button is pressed the piston
advances and the dies grip the union.
•
E06 - GREEN LED - PROXIMITY 1 “WORKING”
: Once the crim-
ping diameter has been reached, the indicator light on the front of
the machine will come on. This LED blinks when E12 (crimping time
potentiometer) is set on a value between – “and” +, for a selected
period of time between 0 and 10 sec.
•
E07 - RED LED - PROXIMITY 1 FAILURE “SLOWDOWN”:
When the red indicator light is on, the proximity 1 “Slowdown” is
not working.
•
E08 - RED LED - PROXIMITY 2 FAILURE “WORKING”:
When the
red indicator light is on, the proximity 2 “Working” is not working.
•
E09 - RED LED “MOTOR ENGINE OVERHEATED”:
When the
red indicator light is on, this means the engine is heating. Reset
the machine with the start button when the light has switched off.
•
E10 - LAMP WHITE - MACHINE POWERED:
the lamp white
indicates the presence of electricity in the machine.
E04
E05
DESCRIPTION OF PANEL CONTROLS:
