AM/FM radio
Tuning into a Radio Station
Tuning Automatically
1. Press TUNER on the remote controller several times to select either "AM" or
"FM".
2. Press MODE on the remote controller so that "TunMode:Auto" appears on the
display.
3. Press the cursors / on the remote controller to start automatic tuning.
Searching automatically stops when a station is found. When tuned into a
radio station, the "TUNED" indicator on the display lights. When tuned into
an FM radio station, the "FM ST" indicator lights.
No sound is output while the "TUNED" indicator is off.
When FM broadcasts reception is poor:
Radio waves may be weak depending on the building structure and environmental
conditions. In that case, perform the procedure as explained below in "Tuning
Manually" to manually select the desired station.
Tuning Manually
1. Press TUNER on the remote controller several times to select either "AM" or
"FM".
2. Press MODE on the remote controller so that "TunMode:Manual" appears on
the display.
3. While pressing the cursors / on the remote controller, select the desired
radio station.
The frequency changes by 1 step each time you press the button. The
frequency changes continuously if the button is held down and stops when
the button is released. Tune by looking at the display.
To return to the auto tuning mode:
Press MODE on the remote controller again so that "TunMode:Auto" appears on
the display. The unit tunes automatically into a radio station.
Tuning to the frequency directly
It allows you to directly enter the frequency of the radio station you want to listen
to.
Playback Function
