If this is to be enabled, then normally you should select "On (All Channels)",
and to disable just the front speakers you should select "On (Except Front Left /
Right)".
6. Disconnect the speaker setup microphone. You cannot use any other menu
options while it is connected.
2. Source Connection
Check that each input source is connected correctly. Follow the guidance, select
the input you want to confirm, start play of the selected player, and confirm that
the images appear on the TV and that sound is played.
3. Network Connection
Set up WiFi connection with an access point such as a wireless LAN router.
There are the following two methods of connecting by WiFi:
"Scan Networks": Search for an access point from this unit. Find out the SSID of
the access point beforehand.
"Use iOS Device (iOS7 or later)": Share the iOS device's WiFi settings with this
unit.
If you select "Scan Networks", there are a further two choices of connection
method. Check the following.
"Enter Password": Enter the password (or key) of the access point to connect.
"Push Button": If the access point has an automatic connection button, you can
connect without entering a password.
If the SSID of the access point is not displayed, then in the screen listing the
SSIDs, select "Other..." with the cursor on the remote controller and press
ENTER, then follow the onscreen instructions.
Keyboard input
