Firmware Update
Updating via USB
Preparation:
Prepare a 128MB or larger USB storage device. FAT16 or FAT32 file system
format.
– Media inserted in a USB card reader may not be used for this function.
– USB storage devices with security function are not supported.
– USB hubs and USB devices with hub function are not supported. Do not
connect these devices to the unit.
Delete any data stored on the USB storage device.
Turn off the controller component (PC etc.) connected to the network.
Stop any playing Internet radio, USB storage device, or server content.
If the multizone function is active, turn it off.
If "HDMI CEC" is set to "On", set it to "Off".
– Press on the remote controller. Then, after selecting "5. Hardware"
"HDMI" and pressing ENTER, select "HDMI CEC" and select "Off".
＊
Some USB storage devices may take long to load, may not be loaded
correctly, or may not be correctly fed depending on the device or their
content.
＊
Our company will not be liable whatsoever for any loss or damage of data,
or storage failure arising from the use of the USB storage device with this
unit. Thank you for your understanding.
＊
The description may differ from the onscreen display but that will not
change the way to operate or the function.
Update
1. Connect the USB storage device to your PC.
2. Download the firmware file from our company's website to your PC and unzip.
Firmware files are named in the following way:
ONKAVR
＊＊＊＊
_
＊＊＊＊＊＊＊＊＊＊＊＊
.zip
Unzip the file on your PC. The number of unzipped files and folders varies
depending on the model.
3. Copy all unzipped files and folders to the root folder of the USB storage device.
Make sure to copy the unzipped files.
4. Connect the USB storage device to the USB port of the unit.
If you connect a USB hard disk drive to the USB port of the unit, we
recommend that you use its AC adapter to power it.
Settings
