"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO IN jack to the CD button.
TV
Default Value: AUDIO 6
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO IN jack to the TV button.
PHONO
Default Value: PHONO
The setting cannot be changed.
2. Speaker
You can make changes to the connection environment of the speakers and
change the volume level. Settings are automatically configured if you use AccuEQ
Room Calibration. This setting cannot be selected if headphones are connected or
audio is output from the speakers of the TV.
1. Configuration
Speaker Channels
Default Value: 7.1.4 ch
Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", "7.1 ch", "2.1.2 ch",
"3.1.2 ch", "4.1.2 ch", "5.1.2 ch", "6.1.2 ch", "7.1.2 ch", "4.1.4 ch", "5.1.4 ch",
"6.1.4 ch", or "7.1.4 ch" to suit the number of speaker channels connected.
Subwoofer
Default Value: 2ch
Set the PRE OUT SUBWOOFER jacks which output audio signals.
"1ch": Only the PRE OUT SUBWOOFER 1 jacks output audio signals.
"2ch": Both the PRE OUT SUBWOOFER 1 jacks and the PRE OUT
SUBWOOFER 2 jacks output audio signals.
"No": Neither the PRE OUT SUBWOOFER 1 jacks nor the PRE OUT
SUBWOOFER 2 jacks output audio signals.
Height 1 Speaker
Default Value: Top Front
Set the speaker type if height speakers are connected to the HEIGHT 1
terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", "Rear
High", "Dolby Speaker (Front)", "Dolby Speaker (Surr)", or "Dolby Speaker
(Back)" according to the type and layout of the connected speakers.
This setting cannot be selected under any of following conditions. Set the
height speakers type to "Height 2 Speaker".
– "BiAmp" is set to "Yes"
– "Zone Speaker" is set to "Zone 2/Zone 3"
When two sets of height speakers are being used, "Top Rear", "Rear
High", "Dolby Speaker (Surr)", and "Dolby Speaker (Back)" cannot be
selected
