"Yes": When a THXcertified subwoofer is connected
"No": When a THXcertified subwoofer is not connected
The setting cannot be changed if "Configuration" "Subwoofer" is set to
"No".
BGC
Default Value: Off
If your listening room layout (for practical or aesthetic reasons) locates most
of the listeners close to the rear wall, the resulting bass level can be
sufficiently reinforced by the boundary that the overall sound becomes
"boomy". THX Select2 Plus receivers contain a Boundary Gain
Compensation (BGC) feature to improve bass balance.
"On": Use this function
"Off": Do not use this function
In the following cases, the setting cannot be changed:
– "Configulation" "Subwoofer" is set to "No".
– "THX Ultra2 / Select2 Subwoofer" is set to "No".
Loudness Plus
Default Value: On
When the setting is set to "On", it is possible to enjoy even subtle nuances of
audio expression at low volume. This is only available when the THX
listening mode is selected.
THX Loudness Plus
THX Loudness Plus is a new volume control technology featured in THX
Ultra2 Plus™ and THX Select2 Plus™ Certified receivers.
With THX Loudness Plus, home theater audiences can now experience the
rich details in a surround mix at any volume level.
A consequence of turning the volume below Reference Level is that certain
sound elements can be lost or perceived differently by the listener. THX
Loudness Plus compensates for the tonal and spatial shifts that occur when
the volume is reduced by intelligently adjusting ambient surround channel
levels and frequency response. This enables users experience the true
impact of soundtracks regardless of the volume setting. THX Loudness Plus
is automatically applied when listening in any THX listening mode. The new
THX Cinema, THX Music, and THX Games modes are tailored to apply the
proper THX Loudness Plus settings for each type of content.
8. EQ for Standing Wave
This controls the affect of the standing waves that occur when sound waves
reverberating off obstacles such as walls interfere with the original sound waves.
Filter 13
Default Value: 0.0 dB
1. After selecting the Filter to adjust from "Filter 1" to "Filter 3" with / ,
press ENTER.