5. Dolby Enabled Speaker
Dolby Enabled Speaker to Ceiling
Default Value: 6' 0" / 1.80 m
Set the distance between the Dolby Enabled Speaker and the ceiling. Select
between " 0' 0" 1/2 "/"0.01 m" to " 15' 0" "/"4.50 m" (1/2 / 0.01 m units).
The unit of distance (feet / meters) shown is the unit selected for use in
"Distance".
AccuReflex
Default Value: Off
You can enhance the reflection effect of Dolby Enabled Speakers from the
ceiling.
"Off": Do not use this function
"On": Use this function
This setting can be selected when "Configuration" "Height 1 Speaker"/"Height
2 Speaker" is set to "Dolby Speaker".
6. Equalizer Settings
You can adjust the output volume of the range of each connected speaker. You
can adjust the volume of the different sound ranges for each of the speakers. You
can set three different equalizers in Preset 1 to 3. You can select up to five bands
for the Subwoofer and nine bands for all other speakers.
Front
Default Value: 0.0 dB
After selecting the speaker frequency from between 25 Hz" and "16 kHz" with
the cursors
/ , adjust the volume of that frequency between "
－
6.0 dB" and "
＋
6.0 dB"
with / .
Center
Default Value: 0.0 dB
After selecting the speaker frequency from between 25 Hz" and "16 kHz" with
the cursors
/ , adjust the volume of that frequency between "
－
6.0 dB" and "
＋
6.0 dB"
with / .
Height 1
Default Value: 0.0 dB
After selecting the speaker frequency from between 25 Hz" and "16 kHz" with
the cursors
/ , adjust the volume of that frequency between "
－
6.0 dB" and "
＋
6.0 dB"
with / .
