General Specifications
Amplifier Section
Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, at 1 kHz; rated 140 watts per
channel minimum RMS power, with no more than 0.08% total harmonic
distortion from 250 milliwatts to rated output.
Surround Mode Output Power (
*
)
(6 ohms, 1 kHz THD 0.9%) 200 W per channel
*
Reference output for each speakers.
Depending on the source and the listening mode settings, there may be no
sound output.
Rated Output Power (IEC) (Others)
11 ch × 200 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD
Maximum Effective Output Power (JEITA) (Asian and Australian)
11 ch × 320 W at 4 ohms, 1 kHz, 1 ch driven of 10% THD
Dynamic Power (
*
)
*
IEC60268Shortterm maximum output power
320 W (3 Ω, Front)
270 W (4 Ω, Front)
160 W (8 Ω, Front)
THD+N (Total Harmonic DisNoise)
0.04% (1 kHz, 100 W)
Input Sensitivity and Impedance (1 kHz, 100 W/8 Ω)
200 mV/82 kΩ (LINE (Unbalance))
3.5 mV/47 kΩ (PHONO MM)
Rated RCA Output Level and Impedance
1 V/330 Ω (PRE OUT)
1 V/330 Ω (SUBWOOFER PRE OUT)
200 mV/1.2 kΩ (ZONE LINE OUT)
2 V/1.2 kΩ (ZONE PRE OUT)
Phono Overload
70 mV (MM 1 kHz 0.5%)
Tone Control Characteristics
±10 dB, 100 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio
108 dB (IHFA, LINE IN, SP OUT)
90 dB (IHFA, PHONO IN, SP OUT)
Speaker Impedance
4 Ω 16 Ω
Headphone Output Impedance
Specifications