4-15
ZUV
User’s Manual
Section 4
CONNECTING TO EXTERNAL DEVICES
Section 4
Connection by USB/RS-232C
■
Command basic format
●
Command format
The non-procedural command format is as follows:
Example: UV irradiation start command START command
• Enter a space (20h) between a command and an argument, or between arguments.
• A delimiter, which is determined according to the communication condition settings, is attached at
the end of a command.
●
Response format
The non-procedural command response format is as follows:
• In the event that a command is successfully executed:
• In the event that a command is not executed successfully, or the command is not set
properly:
• A delimiter, which is determined according to the communication condition settings, is attached at
the end of a response.
• A command error occurs and ER is returned when an invalid command is entered, a value outside
a parameter range is entered, or the number of input parameters exceeds the allowable range.
• A command error occurs, and ER is returned when irradiation is being performed on any of the
channels. (excluding the START/STOP commands)
• "Reply details" is indicated only when command execution completes successfully, and is
described for each of the command format descriptions.
S
T
A
R
T
0
CR
Space (20h)
Delimiter
O
K
CR
E
R
CR
Summary of Contents for ZUV Series
