Omron ZUV Series, User Manual

Page: 48 / 126

3-4
Sect
ion 3
SETUP
ZUV
User’s Manual
Section 3
Setting the Irradiation Conditions
Setting the Irradiation Conditions
Simultaneous adhesion is available for multiple locations under differing conditions by
setting the irradiation conditions.
Two ways of irradiation are provided: constant irradiation, which irradiates at constant
power for a certain time, and pattern irradiation, which irradiates by gradating the power
with a pattern setting of power and time.
Be sure to set the channel, for which irradiation is not performed, to [OFF] in the LOCK mode by
selecting -[CH SET] and then selecting each of the channels from [1CH to 4CH].
Continuous irradiation of
UV light for a certain time
at constant irradiation
power
Pattern irradiation (linear)
Irradiation of UV light by
gradating irradiation power
Irradiation at certain
intervals
Irradiation of UV light by
converting irradiation power
to analog values
Irradiation power
(%)
Irradiation time (s)
(max. 16)
Irradiation power
(%)
Irradiation time (s)
STEP1
STEP2
STEP3
STEP16
(max. 16 steps)
Irradiation power
(%)
Irradiation time (s)
(max. 16 steps)
STEP1
STEP2
STEP3
STEP4 STEP5
Irradiation power
(%)
Irradiation time (s)
Pattern irradiation (steps)
Pattern irradiation (steps)
Constant irradiation