Omron ZUV Series, User Manual

Page: 90 / 126

4-22
Section 4
CONNECTING TO EXTERNAL DEVICES
ZUV
User’s Manual
Section 4
Connection by USB/RS-232C
PATNGET command
This command obtains display type-specific and step-specific irradiation power and
time for from the irradiation pattern settings.
(1) Parameter description
The following parameters can be set and obtained by the PATNGET command:
(2) Command/response examples
The following shows an example of this command:
The following shows an example of a response to this command. Each line is separated by a
delimiter.
The 33 data items are always returned as a set. 0 is returned for levels and times that are
not registered.
PATNGET <Pattern No.>
<Type><STEP1 level><STEP1 time><STEP2 level><STEP2
time> ... <STEP16 level><STEP16 time>
OK
Parameter Setting Range/Output Range
Pattern No. 1 to 16
Type 0: Step type
1: Linear type
STEP xx (xx=1 to 16) level 0 to 100 (%)
STEP xx (xx=1 to 16) time 0 to 9999 (*0.1s)
PATNGET 5
←
Irradiation pattern 5 settings are obtained.
PATNGET 6
←
Irradiation pattern 6 settings are obtained.
1 10 15 25 300 60 1000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
←
Irradiation pattern 5 includes the
pattern irradiation (linear) settings for
three steps.
The irradiation power and time of the
respective steps are; STEP1: 10%, 1.5
seconds, STEP2: 25%, 30 seconds,
and STEP3: 60%, 100 seconds.
OK
0 20 100 40 15 60 200 80 400 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0
←
Irradiation pattern 6 includes the
pattern irradiation (step) settings for
four steps.
The irradiation power and time of the
respective steps are; STEP1: 20%, 10
seconds, STEP2: 40%, 1.5 seconds,
STEP3: 60%, 20 seconds, and
STEP4: 80%, 40 seconds.
OK
Command
Delimiter Delimiter
Response
Delimiter Delimiter
Delimiter Delimiter
Delimiter Delimiter
Delimiter Delimiter
Delimiter Delimiter
Delimiter Delimiter
Delimiter Delimiter
Delimiter Delimiter