![background image](http://html1.mh-extra.com/html/omron/zuv-series/zuv-series_user-manual_743261102.webp)
4-34
Section 4
CONNECTING TO EXTERNAL DEVICES
ZUV
User’s Manual
Section 4
Connection by USB/RS-232C
CALIBGET/CALIBSET commands
The reference value for power tuning is set by the CALIBGET command and executed
by the CALIBSET command.
(1)
Parameter description
The following parameter can be set by the CALIBGET and CALIBSET commands:
(2)
Command/response examples
The following shows an example of this command:
The following shows an example of a response to this command.
• CALIBGET <Channel No.>
• CALIBSET <Channel No.>
OK
Parameter
Setting Range/Output Range
Channel No.
1: Channel 1
2: Channel 2
3: Channel 3
4: Channel 4
CALIBGET 1
←
Setting of the reference value for channel
1 is executed.
CALIBSET 1
←
Power tuning of channel 1 is executed.
CALIBGET 2
←
Setting of the reference value for channel
2 is executed.
CALIBSET 2
←
Power tuning of channel 2 is executed.
OK
←
Command execution ends successfully.
Command
Delimiter
Delimiter
Delimiter
Delimiter
Response
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Summary of Contents for ZUV Series
