4-24
Section 4
CONNECTING TO EXTERNAL DEVICES
ZUV
User’s Manual
Section 4
Connection by USB/RS-232C
PNAMEGET command
This command obtains irradiation pattern names. Only set irradiation pattern names
are returned.
(1)
Parameter description
The following parameters can be set and obtained by the PNAMEGET command:
(2)
Command/response examples
The following shows an example of this command:
The following shows an example of a response to this command. Each line is separated by a
delimiter.
PNAMEGET <Pattern No.>
<Pattern name>
OK
Parameter
Setting Range/Output Range
Pattern No.
1 to 16
Pattern name
CCCCCCCC: 8 single-byte alphanumeric characters
PNAMEGET 1
←
The name of irradiation pattern 1 is
obtained.
Channel 1
←
The name of this irradiation pattern is
channel 1.
OK
Command
Delimiter
Delimiter
Response
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Summary of Contents for ZUV Series
