Omron ZUV Series, User Manual

Page: 77 / 126

4-9
ZUV
User’s Manual
Section 4
CONNECTING TO EXTERNAL DEVICES
Section 4
Connection by USB/RS-232C
Connection by USB/RS-232C
Connection and Communication Settings
This section describes how to connect the controller to an external device using the USB/
RS-232C cable.
Before connecting/disconnecting the external device, make sure that the controller is turned OFF.
■
USB connection
1.
Plug one end of the USB cable into the
USB port of the controller.
2.
Plug the other end of the USB cable into
the USB port of the external device.
●
Setting the communication specifications
This section describes how to set the USB communication settings.
Match the communication specifications of the ZUV to those of the external device.
LOCK mode-[SYSTEM]-[COMM PORT]
Setting value Range
DATA BIT Not used for USB connection (The setting is ignored).
PARITY
STOP BIT
BAUD RATE Set to 115200.
DELIMITER CR, LF, CR+LF (default: CR+LF)
Controller front
Personal computer