Editing the SFC Chart
Section 3-2
86
1 Right-click a transition, and select Connections
- Add Connection From Step
from the pop-up menu.
2 Put the mouse pointer over the output-side of the step to be connected and click.
Connecting the Output of a Transition as the Input for an Isolated Step
A connection can be made from a transition to an isolated step.
1 Right-click a transition, and select Connections
- Add Connection To Step
from
the pop-up menu.
2 Put the mouse pointer over the input-side of the step to be connected and click.
Connecting the Output of an Isolated Step as the Input for a Divergence; or,
Connecting the Output of an Isolated Transition as the Input for a Simultaneous
Sequence Divergence
A connection can be made from an isolated step to a divergence, or from an isolated
transition to a simultaneous sequence divergence.
1 Right-click a divergence or on a simultaneous sequence divergence, and select
Connections
- Add Connection To Divergence
from the pop-up menu.
2 For a divergence, put the mouse pointer over the output-side of the step to be
connected and click. For a simultaneous sequence divergence, put the mouse
pointer over the output-side of the transition to be connected and click.
Connecting the Output of a Divergence as the Input for an Isolated Transition;
or, Connecting the Output of a Simultaneous Sequence Divergence as the Input
for an Isolated Step
A connection can be made from an isolated transition to a divergence, or from an
isolated step to a simultaneous sequence divergence.
1 Right-click a divergence or on a simultaneous sequence divergence, and select
Connections
- Add Connection From Divergence
from the pop-up menu.
2 For a divergence, put the mouse pointer over the input-side of the transition to be
connected and click. For a simultaneous sequence divergence, put the mouse
pointer over the input-side of the step to be connected and click.
Connecting the Output of an Isolated Transition as an Input for a Convergence;
or, Connecting the Output of an Isolated Step as an Input for a Simultaneous
Sequence Convergence
A connection can be made from an isolated transition to a convergence, or from an
isolated step to a simultaneous sequence convergence.
1 Right-click a convergence or on a simultaneous sequence convergence, and
select Connections
- Add Connection To Convergence
from the pop-up menu.
2 For a convergence, put the mouse pointer over the output-side of the transition to
be connected and click. For a simultaneous sequence convergence, put the
mouse pointer over the output-side of the step to be connected and click.
Connecting the Output of a Convergence as the Input for an Isolated Step; or,
Connecting the Output of a Simultaneous Sequence Convergence as the Input
for an Isolated Transition
A connection can be made from an isolated step to a convergence, or from an isolated
transition to a simultaneous sequence convergence.
1 Right-click a convergence or on a simultaneous sequence convergence, and
select Connections
- Add Connection From Convergence
from the pop-up
menu.
2 For a convergence, put the mouse pointer over the input-side of the step to be
connected and click. For a simultaneous sequence convergence, put the mouse
pointer over the input-side of the transition to be connected and click.
Summary of Contents for SYSMAC CX-Programmer 8.1
