Omron SYSMAC CX-Programmer 8.1, Operation Manual

Page: 89 / 154

Editing the SFC Chart Section 3-2
73
Setting AQs (Action Qualifiers)
This section describes how to set an AQ for an action block. One of the 11 AQs must
be set for each action block. The default qualifier is ‘N’.
Multiple action blocks may be inserted into a single step. If a step contains two or more
action blocks, each must be configured independently.
1 Double-click the AQ of an action block, and select an AQ from the combo list.
For specifications on AQ operations, refer to 2-2-3 Action Blocks .
Setting the Timer Unit for a Step Timer
The step timer is started when a step is activated, and when “D”, “L”, “DS” is selected
as the AQ, time control of these actions are executed according to the present value of
the step timer.
The unit of a step timer can be set to seconds or 100 milliseconds.
1 Right-click the step, and select Step Timer - Use Second Timer or Use
Millisecond Timer from the pop-up menu.