Omron SYSMAC CX-Programmer 8.1, Operation Manual

Page: 39 / 154

Window Components Section 1-3
23
1-3-6 Environmental Settings Unique to the SFC Programming
Functions
This section lists environmental setting functions were not supported in
CX-Programmer, but were added for SFC Programming Functions.
Environmental settings include the operating settings of the SFC programming
functions, operation settings, and display settings.
1 Select Tools - Options from the menu.
The Options dialog will be displayed.
2 Select a tab and configure the settings.
3 Click Apply - OK .
Diagrams Tab Page
Editor View to Show When Split: ST (Default: Structured Text)
Sets the content to be displayed when the ST program edit window is in a split window.
Select from Structured Text and Symbols .
The setting is enabled when the project is saved and reopened.
Structured Text
Allows different sections of the same ST program to be viewed in a split window.
Symbols
Displays the ST program edit window and the local symbol table at the same time.
Editor View to Show When Split: SFC (Default: Actions/Transitions)
Sets the content to be displayed in a split window in an SFC editor.
Select from Actions/Transitions , SFC , and Symbols .
The setting is enabled when the project is saved and reopened.
Actions/Transitions
Displays an SFC chart in the SFC editor’s SFC view, and an action program or a
transition program (ladder or ST) in the SFC editor’s program view.
SFC
Displays a single SFC chart in the SFC editor’s SFC view and program view.
The different parts of the single SFC chart can be seen.
Symbols
Displays the local symbol table and SFC chart in the SFC editor.