Appendix B
Specifications
174
Pin 3: Minimum Pulse Width Setting of Pulse Input Response
Use pin 3 only when pin 2 of the C200H-ID501, C200H-ID215, C200H-MD501, C200H-MD115, and C200H-
MD215 is set to ON (i.e., when pulse input is set).
Pin 3
Minimum response input pulse width
OFF
1 ms
ON
4 ms
Pin 4: Input Response Time Setting
Use pin 4 for the C200H-ID501, C200H-ID215, C200H-MD501, C200H-MD115, and C200H-MD215 only.
Pin 4
Input response time
OFF
2.5 ms max.
ON
15 ms max.
Pin 5: Dynamic Data Output Logic Setting
Use pin 5 only when the C200H-OD501 or C200H-OD215 is in dynamic output mode (i.e., when pin 1 is set to ON).
Pin 5
Data output
OFF
Negative logic output
ON
Positive logic output
DIP Switch Settings for High-density I/O Unit (Special I/O Unit)
Model
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
C200H-ID501/215
Setting is
not required
Must be set
Set when
pulse input
is used
Must be set
Setting is
not required
Setting is
not required
C200H-OD501/215
OFF
Setting is
not required
Setting is
not required
Setting is
not required
Setting is
not required
Setting is
not required
ON
Setting is
not required
Setting is
not required
Setting is
not required
Must be set
Setting is
not required
C200H-MD501/115/215
OFF
Must be set
Set when
pulse input
is used
Must be set
Setting is
not required
Setting is
not required
ON
Setting is
not required
Setting is
not required
Setting is
not required
Setting is
not required
Setting is
not required
Summary of Contents for SYSMAC C200H
