43
4-3-2 Example 1: Write with SW2-1 in the Normal Position
Description and Conditions
Example
Before running the program, make the following parameter settings:
Loop 1 SP = 20.0 (Bank no. = 1)
Loop 2 SP = 8.05 (Bank no. = 2)
Loop 1 executed bank number = 1; decimal point position = 1
Loop 2 executed bank number = 2; decimal point position = 2
This is an example of a program that writes data to the EEPROM.
When writing to the RAM, add 4 to the leftmost digit of the command.
Conditions C200H-PID01
Unit number set to 0 (allocated memory: IR100 to IR109).
SW2-1 set ON (Normal) and SW2-2 set ON (C200H PC).
Programming
