8
2-1
Nomenclature
C200H-PID0
j
Front Panel
Model label
Cover
RUN indicator
SW2
(Switching memory contents
and setting direction under
the cover)
SW1
(Unit number setting)
Data Setting Console
connector
Output connector
Input terminal block
Rear Panel
SW202
(Input type setting)
SW203
(Operation and function settings)
Rack connector
Indicators
RUN
Lit when the PID Control Unit is operating normally.
2-2
Switch Settings
The function and setting of switches are identical for all models, except for
SW202.
Unit Number
SW1
Unit number setting
4
2
6
8
0
(1)
(9)
(3)
(5)
(7)
The cut-out indicates the selected position. Negative numbers
are not indicated. Turn the switch with a flat-blade screwdriver.
Turn the switch until it clicks in position. Do not leave the switch
between two settings.
The addresses are allocated as shown in the following table according to the
Unit number setting.
Switch Settings
