13
Use crimp terminals for wiring. Take care not to overtighten the terminal screws.
Tighten the screws to a torque of 0.8 N
S
m.
Crimp Terminals
The screws on the terminal block are M3.5 self-rising terminal screws. Use the
following types of M3.5 crimp terminals.
7 mm max.
7 mm max.
Soldered Lead
Strip insulation from 7 to 10 mm at the end of the wire and carefully solder the
lead.
7 to 10 mm
ÉÉÉ
10
2-3-2 Output Wiring
Connection Diagrams
C200H-PID01 Transistor Output
24 VDC
24 VDC
+
NC: Not connected
The pairs of terminals B2 to A2 and B1 to A1 are shorted internally. Always sup-
ply power to the 24-VDC terminal (B1) as this drives the internal circuits.
Terminal Block
Connections
Wiring
