![background image](http://html1.mh-extra.com/html/omron/sysmac-c200h-pid0-series/sysmac-c200h-pid0-series_operation-manual_742432031.webp)
23
3-3-2 Features
Data Display
Name
Function
PV (Process
Value)
Displays the PV or the parameter symbol selected with the Level
or Display Key (Refer to next page).
SV (Set Value)
The display is as follows, according to the PV display contents.
PV (process value):
SV (set value) is displayed.
Parameter symbol:
Setting/monitor data is displayed.
BK (Bank
Number)
Displays the bank number of the data presently being displayed.
During operation, the executed bank number is displayed. (See
note)
Note Operation begins when the RUN bit of the output relay turns ON.
Operation Indicators
Name
Function
LOOP2
Indicates whether the displayed settings relate to Loop 1 or Loop
2. Press the Loop Key and hold down for approximately 2
seconds to switch between Loop 1 and Loop 2.
Indicator OFF: Loop 1
Indicator ON:
Loop 2
OUT (Output)
Turns ON when the output is ON for
transistor output or voltage output types.
These indicators
relate to the
tl di
l
d
AT
(Auto-tuning)
Blinks at approximately 1 second intervals
during auto-tuning.
currently displayed
loop.
HB (Heater
Burnout)
Turns ON to indicate a heater burnout
alarm.
ALM1 (Alarm)
Turns ON to indicate the temperature is in
the alarm range set with Alarm SV 1
(upper- and lower-limit alarm). Refer to the
following page.
Display Patterns
Display Pattern 1
Display Pattern 2
Executed bank num-
ber or displayed
bank number
Process
value
Set point
Parameter symbol
SV (Set value)
Monitored value
Execution status
Indicator OFF: Loop 1
Indicator ON:
Loop 2
Executed
bank number
or displayed
bank number
Indicator OFF: Loop 1
Indicator ON:
Loop 2
Nomenclature and Features