3-6
D
Status Monitor
Item
Display
Display
unit
Function
U01
Frequency
reference
Hz
Monitors the frequency reference. (Same as FREF)
U02
Output frequency
Hz
Monitors the output frequency. (Same as FOUT)
U03
Output current
A
Monitors the output current. (Same as IOUT)
U04
Output voltage
V
Monitors the internal output voltage reference value of the
Inverter.
U05
DC bus voltage
V
Monitors the DC voltage of the internal main circuit of the
Inverter.
U06
Input terminal
---
Shows the ON/OFF status of inputs.
p
status
: Input ON
: No input
Not
used
Terminal S1: Forward/Stop
Terminal S2: Multi-function input 1 (S2)
Terminal S3: Multi-function input 2 (S3)
Terminal S4: Multi-function input 3 (S4)
Terminal S5: Multi-function input 4 (S5)
U07
Output terminal
---
Shows the ON/OFF status of outputs.
p
status
: Closed
: Open
Not
used
Terminal MA: Multi-function contact
output
U09
Error log (most
)
---
Displays the latest error.
g (
recent one)
Error
U10
Software No.
---
OMRON use only.
H
Example of Forward/Reverse Selection Settings
Key sequence
Indicator
Display
example
Explanation
Press the Mode Key repeatedly until the F/R indicator
is lit.
The present setting will be displayed.
For: Forward; rEv: Reverse
Use the Increment or Decrement Key to change the
direction of motor rotation. The direction of motor
rotation selected will be enabled when the display
changes after the key is pressed.
Note
The direction of motor rotation can be changed, even during operation.
Preparing for Operation and Monitoring
Chapter 3
Summary of Contents for SYSDRIVE 3G3JV-A4002
