No.13S080-10
36
STC-CMB200PCL / STC-CMC200PCL / STC-CMB401PCL / STC-CMC401PCL
Specifications and Users guide
5.2 The Vertical timings
As for Horizontal timing, please refer to the
The horizontal timings (STC-CMB/CMC200PCL, CMB/CMC401PCL)
Three Video scan modes exist. The detail for these three scan modes are described as below.
Full scan: All of line and pixel output from the camera
Binning: Averaged pixel value output from the camera
Subsampling: Skipped the lines and pixels output from the camera
Overview of Full scan
All of the lines and pixels are output and the entire image is shown. For transmitting the image,
some configurations will not be supported, or can drop the frame rate..
Output image from Sensor on Fullscan (STC-CMB2MCL/CMC2MCL)
Output image from Sensor on Fullscan (STC-CMB4MCL/CMC4MCL)
Overview of Binning (2M,4M)
The average pixel value is output and shown in the image. For average pixel data, decreasing the noise
level. This binning does not add the pixel value, but instead increases the black level (this means
narrow dynamic range). For this, the resolution will decrease and frame rate will increase.
Output image from Sensor on 2 x2 binning Output image from Sensor on 4 x4 binning Output image from Sensor on 8 x 8 binning
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.
