No.13S080-10
82
STC-CMB200PCL / STC-CMC200PCL / STC-CMB401PCL / STC-CMC401PCL
Specifications and Users guide
Mode
Trigger Polarity
Positive Positive signal
is availabe as Trigger
Negative
Negative signal is availabe as Trigger
Binning Mode
Normal
Disable the binning
Binning
Enable the binning. As for the actural procedure,please refer to the
Binning[2AH.5-4],Sub[2AH.1-0].
Averaged pixel data make decreasing the noise
level. As for the detail of setting, please refer to the
0.Other
.
Contiune/Trigger Shutter Mode
Continue Mode
Obtaing the image from the camera automatically.The trigger is gerated
inside of the camera continuously.
Trigger Shutter Mode Obtaing the image from the external trigger timing. When this mode is
selected.
Edge Preset, Pulse Width
on the [Trigger Mode] are available.
As for the detail of Continue Mode, Trigger Shutter Mode, please refer to the
6.Camera function modes
.
Trigger Input Selection
CC1: Trigger signal input from camera link conector on pin CC1.
SP4: Trigger singnal input from I/Oport. As for the detail, please refer to the
0.Using the Trigger Signal through
6pin.
Exposure Start Mode
Normal
: Exposure is going to start after trigger input. The exposure can start during the
video out from the camera with horizontal noises.
Horizontal Synchronization The exposure can start during the video out from the camera without horizontal
noises. The maximum delay to start exposure from the trigger inputs in 1H.
Output Format Selection. Video output bit can be selected from 8/10/12 bit. Video output bit is different for
each mode. As for the relation of mode to video output, please refer to the
5.2.
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.
