No.13S080-10
66
STC-CMB200PCL / STC-CMC200PCL / STC-CMB401PCL / STC-CMC401PCL
Specifications and Users guide
7.4.2 Description of the camera control commands
The under line settings
are the factory default settings
Command No.
Command Description
10H:
MOD1[7..0]
[camera function mode 1] Initial data: MOD1[7..0] = 01H
Sets the camera function mode.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7:
No Function
Always set as “0”
D6:
Trigger Polarity
0: Positive
1: Negative
D5:
Trigger Mode
0: Edge Preset
01:Pluse Width
D4 to D1
No Function
Always set as “0000”
D0:
Exposure time unit
0: Line unit
1: u sec unit
Note The horizontal line noise is appeared on the image when Trigger signal is input while the
image output period
11H:
MOD2[7..0]
[Camera function mode 2] Initial data: MOD2[7..0] = 08H
Sets the camera function mode.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 :
No Function
Always set as “0”
D6 to D5:
CameraLink Clock
00:85MHz
01:42.5MHz
Another: No Function
D4:
No Function
Always set as “0”
D3:
Trigger Mode
0:Tigger
1:FreeRun
D2 o D0
No Function
Always set as “000”
Note:While the camera is in Trigger Mode, the video will not output without the trigger signal input.
12H:
MOD3[7..0]
[Camera function mode 3] Initial data: MOD3[7..0] = 50H
Sets the camera function mode.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D6
Video out
00: 10bit
10: 12bit *Note 12H,
01: 8bit
11: No function
(Prohibited setting. Do not set these values)
D5:
Trigger signal input connector
0: Camera Link (CC1)
1: Power/IO connector
(No. 2 pin, SP4)
D4:
Exposure start mode
0: Normal
1: Horizontal Synchronization
D3 to D0:
No function
Sets always as "000"
14H:
UART[7..0]
[The communication mode] Initial data: 1
Sets the communication mode.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D2
No function
Sets always as "000000"
D1 to D0
Communication mode
00: 38,400bps
10: 57,600bps
01: 9,600bps
11: 115,200bps
*Note 12H
:
Video out bit can be selected by mode. As for the support mode, please refer to
5.2
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.