Omron Sentech STC-CMB200PCL, Product Specifications And User'S Manual

Page: 8 / 90

No.13S080-10
8
STC-CMB200PCL / STC-CMC200PCL / STC-CMB401PCL / STC-CMC401PCL
Specifications and Users guide
2.1.2 STC-CMB401PCL (4Meg, Monochrome) / STC-CMB401PCL-NIR (4Meg,Near IR) /STC-CMC401PCL (4Meg,
Color)
Product STC- CMC401PCL STC- CMB401PCL
Electron
ic
specific
ations
Imager 1" 4Meg color progressive CMOS
(CMOSIS: CMV4000)
1" 4Meg monochrome progressive CMOS
(CMOSIS: CMV4000)
Active picture elements 2048 (H) x 2048 (V)
Chip size 11.264×11.264 mm
Cell size 5.5 (H) x 5.5 (V) µm
Scanning system Progressive
Scanning method Full scanning, Variable ROI Full scanning, Variable ROI
Binning scanning, Binning variable ROI*1
Pixel frequency of the
sensor
1X2-1Y
1X4-1Y
1X8-1Y
1X10-1Y
(8bit/10bit):
(8bit/10bit):
(8bit):
(8bit):
10.625MHz (2,048 x 2,048), 21.250MHz (1,024 x 2,048),
42.500MHz ( 512 x 2,048)
21.250MHz (2,048 x 2,048), 42.500MHz (1,024 x 2,048)
42.500MHz (2,048 x 2,048)
48.000MHz (2,040 x 2,048)
Frame rate
Vertical frequency of
the Camera Link output
1X2-1Y
1X4-1Y
1X8-1Y
1X10-1Y
(8bit/10bit):
(8bit/10bit):
(8bit):
(8bit):
39.7fps (2,048 x 2,048), 79.2fps (1,024 x 2,048), 158.6fps (512 x 2,048)
79.3fps (2,048 x 2,048), 158.6fps (1,024 x 2,048)
158.6fps (2,048 x 2,048)
179.2fps (2,040 x 2,048)
Horizontal frequency of
the Camera Link output
1X2-1Y
1X4-1Y
1X8-1Y
1X10-1Y
(8bit/10bit):
(8bit/10bit):
(8bit):
(8bit):
82kHz (2,048 x 2,048), 164kHz (2,024 x 1,048), 329kHz (512 x 2,048)
164kHz (2,048 x 2,048), 329kHz (1,024 x 2,048)
329kHz (2,048 x 2,048)
372kHz (2,040 x 2,048)
Pixel frequency o
the Camera Link output
1X2-1Y
1X4-1Y
1X8-1Y
1X10-1Y
(8bit/10bit):
(8bit/10bit):
(8bit):
(8bit):
85MHz/42.5MHz
85MHz/42.5MHz
85MHz/42.5MHz
85MHz/42.5MHz
Noise level (8bit output) Less than 3 Digit (Gain 0 dB)
Dynamicrange 60 dB
Minimum scene
illumination *Near
Less than 1 Lux at F1.2 Less than 1 Lux at F1.2
- TBD Lux at F1.2
Sync. System Internal
Video
output
'@8bit output 10TAP / FULL / MIDEUM / BASE configuration
'@10bit output MIDEUM / BASE configuration
Shutter speed 45 seconds to 25.8u seconds (Variable at line)
Digital gain 1x to 4x
Gamma 1.0
Power Input voltage 12Vdc ± 10% (PoCL or Power/IO connector)
Less than 3.2 W
Consumption
Operation mode Free-run, Edge preset trigger (V-reset), Pulse width trigger (V-reset)
Communication RS232 via Camera Link connector
Mechan
ical
specific
ations
Dimensions 40 (W) x 40 (H) x 40.5 (D) mm (Excluding the connector)
Optical filter No IR cut filter
Material Aluminum (AC)
Lens mount C mount
Interface connector Camera Link connector: SDR connector x 2
Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent
Weight Approximately 90 g
Environ
mental
specific
ations
Operational temperature -5 to 40 deg. C
Storage temperature -30 to 65 deg. C
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each)
Shock Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3times each
Standard compliancy EMS: EN61000-6-2, EMI: EN55011 (Class A)
RoHS RoHS compliance
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.