No.13S080-10
68
STC-CMB200PCL / STC-CMC200PCL / STC-CMB401PCL / STC-CMC401PCL
Specifications and Users guide
Command No.
Command Description
28H:
DLY[7..0]
[The delay time for the trigger] Initial data: DLY[7..0]
=
0, data range: 0 to 255
Sets the delay time that is from the trigger signal input to start exposure.
Delay time = 2 x DLY[7..0] (usecond)
31H:
DGB[7..0]
[The digital gain]
Initial data: DGB[7..0] = The factory adjusted value (The value of the address 0EH)
Video level = (Input video level - CLAMP[7..0]) x (1 + DGB[7..0] / 64) + CLAMP[7..0]
CLAMP[7..0]: The clamp level (The value of the address 38H)
38H:
CLAMP[7..0]
[The clamp level] Initial data: CLAMP[7..0] = 40, data range: 0 to 255
Sets the clamp level (The clamp level of the black signal).
This value is on 10bit video output/ when 8bit output, 1/4 from setting value output as Clamp level.
3AH:
WBR[7..0]
[White Blance R Gain] Initial data: WBR[7..0] = 0, data range: 0 to 255
Set the Red gain on Bayer
Video level = (Input video level - CLAMP[7..0]) x (1 + WBR[7..0] / 128) + CLAMP[7..0]
Only on Color mode
3BH:
WBB[7..0]
[White Blance GR Gain] Initial data: WBGR[7..0] = 0, data range: 0 to 255
Set the Green gain on Bayer GR line
Video level = (Input video level - CLAMP[7..0]) x (1 + WBGR[7..0] / 128) + CLAMP[7..0]
Only on Color mode
3CH:
WBGR[7..0]
[White Blance GR Gain] Initial data: WBGR[7..0] = 0, data range: 0 to 255
Set the Green gain on Bayer GR line
Video level = (Input video level - CLAMP[7..0]) x (1 + WBGR[7..0] / 128) + CLAMP[7..0]
Only on Color mode
3DH:
WBGB[7..0]
[White Blance GB Gain] Initial data: WBGR[7..0] = 0, data range: 0 to 255
Set the Green gain on Bayer GB line
Video level = (Input video level - CLAMP[7..0]) x (1 + WBGR[7..0] / 128) + CLAMP[7..0]
Only on Color mode
47H:
HDR[7..0]
[HDR slope] Initial data: HDR[7..0] = 0
Sets the slope mode (HDR mode) and number of the slope.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D6
HDR mode
00: Normal
Another: No Function
01: Enable
D5 to D2:
D1 to D0:
No function
Number of the slope
Sets always as "0000"
0: No Function
2: Two Slopes
1: No Function
3: Three Slopes
4BH:
PGA [7..0]
[PGA] Initial data: PGA[7..0] = 0
Sets the gain for adjust the brightness.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7:
No Function
Always set as “0”
D6 to D5:
PGA gain
00: 1.0x gain
01: 1.2x gain
10: 1.4x gain
11: 1.6x gain
D4 to D0:
No Function
Always set as “000000”
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.