![background image](http://html1.mh-extra.com/html/omron/prt1-com/prt1-com_operation-manual_744566177.webp)
Appendix A
GSD file for PRT1-COM
168
Slave_Family
= 3
; Slave family = 3 (I/O).
;
Revision
= ”V1.1”
; Device revision 1.1.
Hardware_Release
= ”V1.0”
; Hardware revision 1.0.
Software_Release
= ”V1.1”
; Software revision 1.1.
;
;
; Specific implementation information *****************************************/
;
Implementation_type = ”SPC3”
; Siemens SPC3 ASIC used.
Redundancy
= 0
; Redundancy NOT supported.
Repeater_Ctrl_Sig
= 2
; Supported, TTL level
24V_Pins
= 0
; No external 24 Volt input.
;
Set_Slave_Add_supp
= 0
; Station address is set
; through hardware address
; selectors.
; Media access information ****************************************************/
; Automatic baud rate select
Auto_Baud_supp
= 1
; (SPC3 specific feature).
; Supported baud rates:
9.6_supp
= 1
; 9600 Baud
19.2_supp
= 1
; 19.2 kBaud
93.75_supp
= 1
; 93.75 kBaud
187.5_supp
= 1
; 187.5 kBaud
500_supp
= 1
; 500 kBaud
1.5M_supp
= 1
; 1.5 MBaud
3M_supp
= 1
; 3 MBaud
6M_supp
= 1
; 6 MBaud
12M_supp
= 1
; 12 MBaud
; Max. response times:
MaxTsdr_9.6
= 60
; 60 Tbit = 6.25 msec.
MaxTsdr_19.2
= 60
; 60 Tbit = 3.125 msec.
MaxTsdr_93.75
= 60
; 60 Tbit = 640 usec.
MaxTsdr_187.5
= 60
; 60 Tbit = 320 usec.
MaxTsdr_500
= 100
; 100 Tbit = 200 usec.
MaxTsdr_1.5M
= 150
; 150 Tbit = 100 usec.
MaxTsdr_3M
= 250
; 250 Tbit = 83 usec.
MaxTsdr_6M
= 450
; 450 Tbit = 75 usec.
MaxTsdr_12M
= 800
; 800 Tbit = 67 usec.
;
Min_Slave_Intervall = 10
; Minimum slave interval =
; 1 msec.
;
; DP-slave information ********************************************************/
;
Freeze_Mode_supp
= 1
; Freeze mode supported.
Sync_Mode_supp
= 1
; Sync mode supported.
Fail_Safe
= 1
; Fail safe supported.
;
Modular_Station
= 1
; Modular station.
Max_Module
= 9
; Maximum # of modules: 9.
FixPresetModules
= 1
; Enable fixed modules preset.
; (Siemens Configurators).
Max_Input_Len
= 132
; Maximum # of input bytes.
Max_Output_Len
= 128
; Maximum # of output bytes.