![background image](http://html1.mh-extra.com/html/omron/prt1-com/prt1-com_operation-manual_744566160.webp)
7-3
Section
Counter Units
150
This section provides a procedure example starting from the settings of the
Counter Unit up to the outputting of comparison results.
This example only provides the basic procedure. For details about actual setting
and programming, refer to page 144,
Word Functions
or
5-1 Examples of
Counter Unit Operation
.
Counter Unit startup
Set value 1, 2 setting
(Set values and output
conditions)
Count value setting
External output 1, 2
enable/disable setting
Reset mode selection
Count mode selection
(count start)
Count value/set value reading
Count value reset
Count value change
Words n, n+1, n+2, bits 00, 01
(Refer to page 143.)
Words n, n+1, n+2, bit 02
(Refer to page 142.)
Word n+2, bits 08, 09
(Refer to page 140.)
Word n+2, bits 12 to 14
(Refer to page 141.)
Word n+2, bits 10, 11
(Refer to page 139.)
Word n+2, bits 04 to 06, words m, m+1
(Refer to page 143.)
(Refer to page 141.)
Words n, n+1, n+2, bit 02
(Refer to page 142.)
: Perform as necessary
Dimensions
(Unit: mm)
Approx. 70
Note
The vertical center of the Unit is 4.9 mm lower than the center of the DIN track.
The Unit therefore extends downward 41.4 mm (including the mounting hook)
from the DIN track center.
Procedure Example