![background image](http://html1.mh-extra.com/html/omron/f250/f250_setup-manual_741266027.webp)
23
F250
Setup Manual
SECTION 2
Installation and Connections
SECTION 2
Mounting th
e C
o
n
tro
ller
Mounting the Controller
There are two ways to mount the Controller: horizontal mounting, or vertical mounting.
Dimensions
Use the correct screw length. If the screw extends more than 13 mm past the panel, the stopper may bend
and contact the Controller's internal PC board.
Horizontal Mounting
For proper air flow, provide at least 20 mm of clearance from the top of the Controller and at least
50 mm of clearance from the sides (next to the intake and exhaust vents).
㩷
(Unit:mm)
This screw hole cannot be used.
115 min.
Stopper
10 to 13
Panel thickness: T
Four M4 taps
(for mounting) *
* The screw length L must be in the
following range: 10+T < L < 13+T
This screw hole cannot be used
115 mm min.
20 mm min.
20 mm min.
8 mm
50 mm min.
(Exhaust)
50 mm min.
(Exhaust)