![background image](http://html1.mh-extra.com/html/omron/f250/f250_setup-manual_741266052.webp)
48
SECTIO
N
4
Co
nn
ecting
thro
ug
h the
Se
rial Inter
face
F250
Setup Manual
SECTION 4
Connecting External Devices
Connection Methods
Align the connector with the socket and press the connector straight into place.
Turn OFF the power supply before connecting or disconnecting Cable.
Peripheral devices may be damaged if the cable is connected or disconnected with the power ON.
The various connectors on the Controller are capped when the Controller is shipped.
When the Ethernet interface isn't used, leave the cap in place or replace the cap to protect against dust, dirt,
and static electricity.
Setting the Controller's IP Address and Subnet Mask.
Chapter 6 Communicating with External Devices in the Operation Manual