57
F250
Setup Manual
SECTION 5
Troubleshooting and Maintenance
SE
CTION 5
Ma
in
tena
nc
e
Maintenance
Replacing the Light
•
The Light will gradually lose brightness over time (about 20% loss after 1,500 hours of use).
Replace the Light after about 1,500 hours of use.
•
Replace the Light if it is damaged or not fully functional.
F150-SL20A/SL50A
Removing the Light
1.
Disconnect the light cable from the light connector on the back of the Camera.
2.
Remove the light cable from the slot in the camera base.
3.
Remove the two screws securing the Light.
4.
Remove the Light from the Camera.
Do not disassemble the Lens.
Light model
Remark
F150-LT10A
The F150-LT10A cannot be connected to the older F150-S1 Camera.
Camera base
Light
Camera cable connector
Lighting connector
Hold this part when removing
the Cable.