![background image](http://html1.mh-extra.com/html/omron/f250/f250_setup-manual_741266063.webp)
59
F250
Setup Manual
SECTION 5
Troubleshooting and Maintenance
SE
CTION 5
Ma
in
tena
nc
e
F150-SLC20/SLC50 or F160-SLC20/SLC50
Removing the Light
1.
Disconnect the light cable from the light connector on the back of the Camera.
2.
Remove the light cable from the slot in the camera base.
3.
Remove the two screws securing the Light.
4.
Remove the two screws securing the Light.
5.
Remove the Light from the Camera.
Do not disassemble the Lens.
When you want to use the Camera alone without connecting an Intelligent Lighting, use M2 × 3 screws in the
bottom of the Camera instead of the long screws removed in step 4.
The screws removed in step 3 are not needed.
Field of vision
Light model
20 mm
F150-LTC20
50 mm
F150-LTC50
Camera base
Light
Hold this part when removing
the Cable.