![background image](http://html1.mh-extra.com/html/omron/f250/f250_setup-manual_741266037.webp)
33
F250
Setup Manual
SECTION 3
Lenses, Lighting, and Memory Cards
SECTION 3
Me
mor
y Cards
Memory Cards
Use a Memory Card to back up data such as settings and image data or increase the number of scenes
when you are using the Scene Group function. Data from the Controller can be backed up in the
computer just by inserting the Memory Card into the computer and copying the desired data.The
following procedures also apply to the Memory Card containing the Application Software.
The Controller is equipped with two Memory Card slots.Use these slots for the following functions.
A filler card with no memory is inserted into the Controller's Memory Card slot before the Controller is
shipped.Remove this filler card and install a Memory Card to use the Memory Card functions.
If Memory Cards are not being used, leave the filler card in place to prevent dust or dirt from entering the
Memory Card slot.
Installing a Memory Card
1.
Insert the Memory Card into the Memory Card
slot.
The eject button will pop out slightly when the Memory Card
is inserted properly.
Recommended Model
Manufacturer
Item
Capacity
OMRON Corporation
F160-N128S
128 MB
Function
Slot number
Application Software installation
Slot 0 (Use slot 0 only.)
Memory Cards for scene groups
Slot 1 (Use slot 1 only.)
Memory Cards for data backup
Either slot 0 or 1 can be used.