![background image](http://html1.mh-extra.com/html/omron/f250/f250_setup-manual_741266055.webp)
51
F250
Setup Manual
SECTION 5
Troubleshooting and Maintenance
SE
CTION 5
T
rou
ble
sh
o
o
ti
ng
Connection Errors (continued)
Menu Operation Errors
Parallel Interface Errors
Problem
Probable cause
Reference
The indicators do not turn
ON.
(for Cameras with Light
Source)
•
The lighting cable is not correctly connected to the
Camera.
•
Power is not being supplied to the Controller.
•
When using a Camera with Intelligent Lighting,
the DIP switch pins are not set to 0.
•
When using Intelligent Lighting with the F160-S2 camera
model, the number of input lines is not set to 484.
Operation
Manual
Problem
Probable cause
Reference
The measurement results
are not displayed on the
Monitor.
•
The Controller is not in Monitor or Run mode.
Operation
Manual
Problem
Probable cause
Reference
Trigger signals (input
signals) are not received.
•
The cables are not correctly wired.
•
The signal line is disconnected.
The status of communications can be checked with the I/O
monitor.
•
The Controller is not in Monitor or Run mode.
Operation
Manual
Signals cannot be output
externally.
•
The trigger signal has not been input.
•
The cables are not correctly wired.
•
The signal line is disconnected.
The status of communications can be checked with the I/O
monitor.
•
The Controller is not in Run mode.
Operation
Manual