![background image](http://html1.mh-extra.com/html/omron/f250/f250_setup-manual_741266032.webp)
28
SECTION 2
Pow
e
r Sup
p
ly
a
n
d Grou
nd
F250
Setup Manual
SECTION 2
Installation and Connections
Wiring the Power Supply
Wire the Power Supply Unit independently of other devices.In particular, keep the power supply
wired separately from inductive loads.
Use a power supply that meets the following specifications.
Use a DC power supply with countermeasures against high voltages (safe extra low-voltage circuits on the
secondary side).
If the system must meet UL standards, use a UL class II power supply.
•
Keep the power supply line as short as possible (less than 10 m).
•
After wiring, replace the protective cover on the power supply terminals.
Condition
Recommended Model
Output current Power supply voltage
Manufacturer
Item
3.7A min.
24 VDC +10%, -15%
OMRON Corporation
S8VS-12024
24VDC
-
+