manualshive.com logo in svg

Omron CX-SUPERVISOR - V2.0, User Manual

Share
Download
Omron CX-SUPERVISOR - V2.0 User Manual Download Page 72

OMRON

 

 

CHAPTER 4 – Objects

 

 

Release 2.0 

Page 49 

 

Alarms are defined using the Alarm Editor; refer to chapter 8, Alarms for information on using the 
Alarm Editor. 

The Alarm Wizard allows entry of the alarm group filter, alarm status colour codes and various style 
attributes.  The Alarm Wizard presents a preview of the alarm object, which immediately updates to 
show the user selections as they are made. 

1, 2, 3… 

1.

 

Select the name of the alarm group by which alarm messages are to be 
filtered using the 

Group 

field to display the list of available groups.  The 

default selection is 

<All Groups>, 

which displays all alarm messages. 

To display more than one group use the * wildcard character e.g. Group1* 
will include all groups starting Group1. 

 

2.

 

From the Acknowledge On Click options select the level of security that is 
required for acknowledgement.  The default is 

All Users.

 

Summary of Contents for CX-SUPERVISOR - V2.0



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands