Omron CX-SUPERVISOR - V2.0, User Manual

Page: 33 / 370

CHAPTER 1 – Graphics Editor OMRON
Page 10
Revision 2.0
The Font Name field displays the current font attribute for the selected object(s). To change the font
for a block of text, highlight it and click either: the down arrow adjacent to the edit part of the
control, or into the edit part of the control itself, for the
Font Name field. The control then displays a
list of available fonts, from which the desired typeface may be selected.
If more than one block of text is selected with each having different font attributes, the edit part of the
control is empty. However, selecting a font from the supplied list still sets the font attribute for all
the selected group of text blocks.
Fonts and font families are printer dependent, therefore changing the printer within the Printer Setup
dialog (accessed from the
File menu) changes the fonts which are available within the Font Name
field.
Font Size
The Font Size field contains a list of point sizes available on the host version of Windows for the
selected font. The list is presented in numerical order.
The following illustration shows the control in de-selected state:
The following illustration shows the control in selected state:
Either click the cursor into the editable area of the control and enter a new point size, or click the
down arrow and select a new point size from the presented list.
The control displays the current point size for the selected block of text. If more than one block of
text is selected having different point sizes, the edit part of the control is empty. However, selecting a
font from the supplied list (or typing in a new point size) still sets the point size for all the selected
blocks of text.