5 To perform shutdown processing of the devices
5-1 The outline on the UPS monitoring software
BU150R
79
5
Additional Information
Explanation of software functions
Function name
Description
1. Auto shutdown
The computer can be shut down automatically when a
problem occurs with the power supply.
2 UPS monitoring
(operating status)
The operating status of the UPS can be monitored (in
Commercial Power Mode/Battery Mode).
3. UPS monitoring (data) Monitoring can be performed for input voltage value,
connection capacity, battery capacity, etc.
4. Pop-up notification
When a problem such as a power failure occurs, a pop-up
window that shows the details of the problem can be
displayed depends on OS.
5. Shutdown when OS is
inactive
Shutdown can be performed when the computer is in an
inactive state. The operating status is retained at
shutdown in inactive state, so operation details are not
lost.
6. Schedule operation
Schedule settings can be made for UPS stop/start.
7. UPS setting change
UPS settings (beep ON/OFF, etc.) can be changed. (Items
that can be set vary according to the UPS.)
8. External command
execution
By executing commands at shutdown, items such as
application programs can be launched.
9. Event log save
Information of events that occur on the UPS (power supply
problems, setting changes, occurrences of failure, etc.)
are saved as a log.
10. Data log save
Data of input/output voltage value, connection capacity,
etc. is periodically saved as a log (the save frequency can
be set).
11. Coordinated shutdown When a problem occurs with the power supply, multiple
computers connected to the UPS can coordinate to
perform auto shutdown.
12. Output receptacle
control
The UPS output receptacles can be individually set to
ON/OFF.
13. Redundant power
supply support
Two or more UPS can be connected to computers
equipped with redundant power supply. Shutdown is not
performed when a power supply problem affects only one
of the units. Shutdown is performed only when a power
supply problem occurs with both UPS, so the system's
operating rate is improved.
14. Remote UPS
management
The UPS can be managed remotely from a computer on
the network.
15. Mail send
When a problem such as a power failure occurs, a
notification email describing the problem can be sent to
the system administrator.
16. SNMP management
UPS management information can be sent to the SNMP
manager.
17. Telnet connection
Settings such as shutdown parameters can be made via
the Telnet connection.
18. SYSLOG support
UPS management information can be recorded in
SYSLOG.
Summary of Contents for BU150R
