OmniSwitch os6900, Network Configuration Manual, Page: 158 / 942

Quick Steps for Configuring Static Link Aggregation Configuring Static Link Aggregation
page 7-4 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Note. Optional . You can verify your static link aggregation settings with the linkagg range command
along with the agg keyword and aggregate group ID. For example:
-> show linkagg agg 1
Static Aggregate
SNMP Id : 40000001,
Aggregate Number : 1,
SNMP Descriptor : Omnichannel Aggregate Number 1 ref 40000001 size 4,
Name : ,
Admin State : ENABLED,
Operational State : UP,
Aggregate Size : 4,
Number of Selected Ports : 4,
Number of Reserved Ports : 4,
Number of Attached Ports : 4,
Primary Port : 1/1
You can also use the show linkagg port port command to display information on specific ports. See
“Displaying Static Link Aggregation Configuration and Statistics” on page 7-11 for more information on
the show commands.
An example of what these commands look like entered sequentially on the command line on the local
switch:
-> linkagg static agg 1 size 4
-> linkagg static port 1/1-4 agg 1
-> vlan 10 port default 1
And an example of what these commands look like entered sequentially on the command line on the
remote switch:
-> linkagg static agg 1 size 4
-> linkagg static port 1/9-12 agg 1
-> vlan 10 port default 1