Configuring Static Link Aggregation
Displaying Static Link Aggregation Configuration and Statistics
OmniSwitch AOS Release 7 Network Configuration Guide
June 2013
page 7-11
Displaying Static Link Aggregation Configuration
and Statistics
You can use Command Line Interface (CLI)
show
commands to display the current configuration and
statistics of link aggregation. These commands include the following:
When you use the
show linkagg
command without specifying the link aggregation group number and
when you use the
show linkagg port
command without specifying the slot and port number these
commands provide a “global” view of switch-wide link aggregate group and link aggregate port
information, respectively.
For example, to display global statistics on all link aggregate groups (both static and dynamic), enter:
-> show linkagg
Number Aggregate SNMP Id Size Admin State Oper State Att/Sel Ports
-------+--------+--------+-----+-----------+----------+-------+-----+
1 Static 40000001 4 ENABLED DOWN 0 0
2 Static 40000002 8 ENABLED DOWN 0 0
10 Dynamic 40000010 8 ENABLED DOWN 0 0
For example, to display global statistics on all ports associated with link aggregate groups (both static and
dynamic), enter:
-> show linkagg port
A screen similar to the following would be displayed:
Slot/Port Aggregate SNMP Id Status Agg Oper Link Prim
---------+----------+--------+--------+---+----+----+-----
2/1 Static 2001 ATTACHED 1 UP UP YES
When you use the
show linkagg
agg
command with the link aggregation group number and when you use
the
show linkagg port
command with the slot and port number these commands provide detailed views of
link aggregate group and link aggregate port information, respectively. These detailed views provide
excellent tools for diagnosing and troubleshooting problems.
Displays information on link aggregation groups.
Displays information on link aggregation ports.