Configuring Dynamic Automatic Fabric
Configuring Auto-Fabric
OmniSwitch AOS Release 7 Network Configuration Guide
June 2013
page 14-15
Configuring and Saving the Discovered Configuration
•
The LACP, SPB, and MVRP configuration can be saved. For MVRP only CLI configuration is saved,
the MVRP VLANs must be converted to static VLANs to be saved.
•
Manually - The configuration discovered by SPB and LACP will be saved to the configuration file
(boot.cfg) post discovery if the
write memory
command is given.
•
Automatically - The system will save the discovered configuration to the configuration file (boot.cfg)
at set periods automatically if this is enabled. For example if LACP discovery is successful, all the
LACP configuration will be saved to the configuration file This feature can be disabled and the inter-
val changed.
To automatically save the discovered configuration use the
auto-fabric config-save interval
and
fabric config-save admin-state
-> auto-fabric config-save admin-state enable
-> auto-fabric config-save interval 600