Modifying Dynamic Link Aggregate Group Parameters
Configuring Dynamic Link Aggregation
page 8-26
OmniSwitch AOS Release 7 Network Configuration Guide
June 2013
For example, to modify the port priority of dynamic aggregate partner port 3 in slot 4 to 100, enter:
-> linkagg lacp port 4/3 partner admin-port priority 100
Restoring the Partner Port Priority
To remove a user-configured partner port priority from a dynamic aggregate group partner port
configuration use the
no
form of the
linkagg lacp port partner admin port-priority
command by
entering
no linkagg
lacp port
, the slot number, a slash (
/
), the port number,
partner admin-port priority
.
For example, to remove a user-configured partner port priority from dynamic aggregate partner port 3 in
slot 4 you would enter:
-> no linkagg lacp port 4/3 partner admin-port priority