Configuring RIP
RIP Options
OmniSwitch AOS Release 7 Network Configuration Guide
June 2013
page 19-11
Enabling a RIP Host Route
A host route differs from a network route, which is a route to a specific network. This command allows a
direct connection to the host without using the RIP table. If a switch is directly attached to a host on a
network, use the
command to enable a default route to the host. For example:
-> ip rip host-route
The default is to enable a default host route.
Use the
no ip rip host-route
command to disable the host route. Use the
show ip rip
command to display
the current host route status.