OmniSwitch os6900, Network Configuration Manual, Page: 178 / 942

Modifying Dynamic Link Aggregate Group Parameters Configuring Dynamic Link Aggregation
page 8-12 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Modifying Dynamic Link Aggregate Group
Parameters
The table on page 8-3 lists default group and port settings for Alcatel-Lucent Dynamic Link
Aggregation software. These parameters ensure compliance with the IEEE 802.3ad specification. For most
networks, these default values need not be modified or can be modified automatically by the switch
software. However, if you need to modify any of these default settings, see the following sections to
modify the parameters for:
•
Dynamic aggregate groups on page 8-12
•
Dynamic aggregate actor ports on page 8-17
•
Dynamic aggregate partner ports on page 8-21
Note . You must create a dynamic aggregate group before you can modify group or port parameters. See
“Configuring Dynamic Link Aggregate Groups” on page 8-8 for more information.
Modifying Dynamic Aggregate Group Parameters
This section describes how to modify the following dynamic aggregate group parameters:
•
Group name (see “Modifying the Dynamic Aggregate Group Name” on page 8-13 )
•
Group administrative state (see “Modifying the Dynamic Aggregate Group Administrative State” on
page 8-13 )
•
Group local (actor) switch actor administrative key (see “Configuring and Deleting the Dynamic
Aggregate Group Actor Administrative Key” on page 8-14 )
•
Group local (actor) switch system priority (see “Modifying the Dynamic Aggregate Group Actor
System Priority” on page 8-14 )
•
Group local (actor) switch system ID (see “Modifying the Dynamic Aggregate Group Actor System
ID” on page 8-15 )
•
Group remote (partner) administrative key (see “Modifying the Dynamic Aggregate Group Partner
Administrative Key” on page 8-15 )
•
Group remote (partner) system priority (see “Modifying the Dynamic Aggregate Group Partner System
Priority” on page 8-16 )
•
Group remote (partner) switch system ID (see “Modifying the Dynamic Aggregate Group Partner
System ID” on page 8-16 )